How To Set Up Bt Wifi Extender 750

How to Configure My Range Extender when there is no WPS Button on My Router.

Suitable for models: TL-WA750RE, TL-WA850RE, TL-WA854RE

If WPS setup was unsuccessful or your router doesn't have a WPS button, you lot can use another method to configure your range extender.

Range Extender Setup via Method 2: Spider web Management Folio

Ethernet Connection

Stride 1:

For the TL-WA750RE and TL-WA850RE models, the virtually efficient way to configure your range extender is through the spider web management page. You lot can access the web management folio by connecting your range extender to Ethernet. (Each range extender bundle includes an Ethernet cable.)

Before starting, make certain your range extender is powered on and remains on during this process. Once powered, plug ane end of the cable into the Ethernet port on your laptop or desktop PC, and connect the other end into the Ethernet port of the range extender.

Annotation: If your laptop or desktop PC isn't capable of connecting to a wireless network, you can still connect your range extender to your PC. Locate the Ethernet cable running from your router to your PC, and unplug the end connected to your PC. Then, plug it direct into the range extender. This will constitute an Ethernet connection from the range extender to the PC.

Wireless Connectedness

Footstep 1A: Y'all can also set up upwards the range extender via a wireless connectedness. (The TL-WA854RE does not have an Ethernet interface, so y'all must complete setup using a wireless connection.) To do this, please navigate to the wireless connection list on whatsoever wireless device (laptop, tablet, or smartphone), and connect to the default TP-Link_xxxxxx network.

Below is an example of how to connect to the default TP-Link_xxxxxx wireless network in Windows 7. (All versions of Windows will be similar).

Note: Please disregard the multiple TP-Link_xxxxxx entries in the window in a higher place, yous should only see ane TP-Link wireless network name (SSID) in the available connections listing.

Pace ii:  Once a direct Ethernet connexion has been established between your computer and the range extender, be sure to disconnect from any wireless network that your computer may be connected to. This will only use to laptops and/or desktop PCs that have wireless adequacy.

Pace 2A:

This footstep isn't necessary for wireless setup. Proceed to Footstep 3A.

Below is an case of how to disconnect from a wireless network in Windows vii.

Here is an example of how to disconnect wirelessly in Mac OS.

During this process, your reckoner will not have Internet access. Even so, since you are directly continued to the range extender, yous tin can yet admission the range extender'due south spider web management page.

Step iii: After disconnecting from your wireless network, open whatsoever web browser on your computer (Internet Explorer [Microsoft Edge on Windows 10], Google Chrome, Mozilla FireFox, Apple Safari). Then navigate to the address or URL bar at the tiptop of the browser and type in tplinkrepeater.cyberspace or tplinkextender.net. (The ane you use will depend on the range extender y'all own.)

Step 3A: In one case a wireless connection has been established from your device to the TP-Link_xxxxxx wireless network, please open up a web browser on your wireless device. Locate the address or URL bar at the top of the browser and type in tplinkrepeater.cyberspace, tplinkextender.net. (The one you use will depend on the range extender y'all ain.)

Step 4: If the login is successful, the post-obit window volition appear within your browser.  Use admin for the username and countersign.

Note: If the login try with the domain tplinkrepeater.net/tplinkextender.internet is unsuccessful, delete information technology from the address bar. Instead, type the following IP address: 192.168.0.254. (This is the range extender's default IP accost.)  Both the domain address and default IP address will access the same login windows as displayed above.

***If attempting to configure the TP-Link extender from a Mac estimator, the login window above will immediately brandish one time an Ethernet connection is established between your computer and the TP-Link extender.

Step 5: Once you have successfully logged into the range extender, the post-obit window volition appear. (All range extender models: TL-WA750RE, TL-WA850RE, TL-WA854RE will display the aforementioned web management page.

1. Select Side by side within the middle section of the spider web management page.

2) Select your region

3) Cheque or Select your own wireless network

Note:  If your main router's wireless network name is hidden or you take disabled the SSID broadcast on your wireless router, please select Set SSID and MAC Manually.

Below is the window forReady SSID and MAC Manually. (You volition need to manually enter your wireless network settings below.)

         4) Enter your wireless network countersign.

five) From this same window y'all can select Copy from Primary Router/AP which will crusade the range extender to broadcast the same name as your existing wireless network.  If you select Customize, this will let y'all to manually set the wireless name that the range extender will broadcast. (We recommend leaving the selection on Re-create from Master Router/AP.)  When finished, select Adjacent.

6) Please review your settings to ensure all the information is right and so select Stop.

Upon selecting FINISH, the range extender will reboot to apply your settings. Please let upwards to 2 minutes for this procedure to complete.  Once the range extender finishes rebooting, the LEDs on the front of the range extender should appear as follows.

TL-WA850RE/TL-WA854RE (WA854RE will not have an Ethernet LED indicator)

Successful Setup

The range extender light should remain solid

The Wireless LED will continue to flash

The Indicate Strength indicators will range from 3 to 5 LEDs depending on how close the range extender is to the wireless router.

TL-WA750RE

Successful Setup

The range extender light should remain solid

The Wireless LED will continue to flash

The Signal Strength indicators will range from iii to 5 LEDs depending on how shut the range extender is to the wireless router.

How To Set Up Bt Wifi Extender 750,

Source: https://www.tp-link.com/us/support/faq/939/

Posted by: gatesimpt1961.blogspot.com

Share this post