How To Set Up Fire Tv Cube

If you have a Fire TV Cube, you need to position the device optimally, connect the device to your TV, and and so trudge through the setup process. The following give-and-take explains all.

Photograph courtesy of Amazon

Amazon's Fire TV Cube.

How to position your Fire Television set Cube

Subsequently you lot've liberated your Fire Television set Cube from its packaging, one obvious question arises: Where the heck exercise you put it? Somewhere near your Television set seems like the obvious answer, merely choosing the best location is a scrap more complicated than that. Here are some things to consider:

• Your Fire TV Cube requires total-time power, and then brand sure there's an outlet shut enough to the device.
• Your Fire TV Cube connects to an HDMI port on your Idiot box, then it needs to be close enough to your TV that your HDMI cable tin can reach.
• Idiot box or sound system speakers can befuddle the Burn down Television Cube's built-in microphone, so make sure all speakers are at least 1 to 2 anxiety away from your Burn down TV Cube.
• Make sure the Burn Television Cube is within range of your Wi-Fi network.
• Make sure the device is shut enough that you tin can give your vox commands without having to yell. Depending on the ambient dissonance in your environment, this usually ways being within fifteen to 20 feet of the device.
• Don't shop the Fire TV Cube inside a cabinet or other enclosed location.
• Position the Fire TV Cube with the four buttons facing upwards, and the Amazon logo facing where you normally sit when you watch TV.

Get to know your Burn TV Cube'south Alexa hardware

Fire Tv Cube is a combination of a streaming media device and an Alexa-enabled smart speaker. The latter ways that you tin can send vox commands to the Fire Boob tube Cube to control your TV and Fire Idiot box, and the Fire Television Cube also responds to questions and other utterances. Before standing with the Burn TV portion of the setup, it makes sense to showtime learn the basics of your Fire TV Cube's Alexa hardware.

Taking a closeup look at the far-field microphone

Computers take had either external or born microphones for a few decades, and, of class, smartphones and tablets take had internal microphones from day ane. Simply the characteristic that all these microphones have in mutual is that they assume the speaker is relatively close — inside a few inches or, at nearly, a pes or two. Move much further away, and those microphones get notoriously unreliable considering they have trouble distinguishing your voice from the background noise in your environment.

That sort of second-rate microphone performance but won't do for the Fire Television set Cube whenever you're relying on voice commands to get things washed because those commands could be coming from 10, xv, or even 20 feet away. To get accurate and clear voice recordings, your Fire TV Cube relies on a technology called the far-field microphone, which is optimized to distinguish a voice from the ambient room dissonance even when that phonation is far away. Your Burn down Television set Cube's far-field microphone uses some fancy-schmancy technology to accomplish this difficult task:

• Microphone array: The Fire TV Cube's "microphone" is really an assortment of viii individual microphones, as shown by the circles in Effigy 3-8. Notation that these microphones are bundled somewhat narrowly from the front of the device to the dorsum. The line created past this arrangement is the management that Fire TV Cube expects your voice commands to come from. This is why, equally I explicate earlier (meet "Positioning your Burn down Telly Cube"), you demand to place your Fire Boob tube Cube so that the front (where the Amazon logo resides) is pointing to where yous sit when you lot watch TV.
• Noise reduction: Detects unwanted audio signals (known in the audio trade as noise) and reduces or eliminates them.
• Acoustic repeat cancellation: Detects sounds coming from a nearby loudspeaker (such sounds are known as acoustic repeat) — even if that loudspeaker is the Fire Goggle box Cube itself — and reduces or cancels them to ensure accurate vox recordings.
• Beamforming: Uses the microphone array to determine the management your vocalism is coming from and then uses that directional information to home in on your vocalisation.
• Barge-in: The microphone ignores whatsoever media the Alexa device is currently playing — such as a song or podcast — so that the microphone can more than easily observe and recognize a simultaneous voice command (thus enabling that command to "barge in" on the playing media).
• Speech recognition: Detects the audio patterns associated with spoken language and focuses on those patterns instead of whatever surrounding noises.

Pushing the Fire Idiot box Cube's buttons

Your Fire Television Cube is congenital to be a hands-free device, which is a welcome design choice when you take one manus in a bowl of popcorn and the other clutching your favorite beverage. All the same, easily-free doesn't mean easily-off considering your Burn down Tv Cube's outer trounce is festooned with four buttons that you tin apply to command certain aspects of the device.

Here'south a summary of the available buttons:

• Activeness: Activates Alexa. That is, pressing the Action push is the same as proverb Alexa'south wake discussion.
• Microphone Off: Turns the Fire TV Cube microphone off. When the microphone is off, this button glows red, as does the Fire Tv set Cube light band. Press this push button again to turn the microphone back on.
• Volume Upwardly: Increases the volume (no surprise, there).
• Volume Downwardly: You lot guessed information technology: decreases the volume.

How to connect Burn down TV Cube to your Television set

Your Burn Telly Cube connects to your Telly's HDMI port, which on nearly TVs is labeled HDMI. If your Goggle box has multiple HDMI ports (as most mod TVs do), and then the ports are usually labeled HDMI 1, HDMI 2, and and so on.

Your Burn down TV Cube has a built-in infrared transmitter that enables yous to use vocalism commands to control other devices in your habitation entertainment system, such equally your Idiot box (for example, to turn it on and off), sound receiver, Blu-ray player, cable ready-height box, or satellite receiver. In other words, your Burn TV Cube, besides being a streaming media device and a smart speaker, is besides a universal remote!

The IR transmitter (some folks telephone call it an IR blaster) is inside Burn Goggle box Cube, but it may not work for some devices that you lot've stored inside a cabinet or other enclosed area. Are you out of the IR blaster game in that case? Not at all. Instead, you can connect the IR extender cablevision that comes with Fire Tv Cube. Connect the IR extender cablevision's jack to the corresponding port on the back of Fire Television receiver Cube, and then position the cube cease of the cable as close every bit you can to the enclosed device or devices you lot want to command.

With your Burn down TV Cube connected to your TV, take hold of the power cable that came with your Fire TV Cube. Connect one end of the ability cable to the power port on the back of the Fire TV Cube, and plug the other end of the cablevision into a ability outlet.

Turn on your Television and change the input source to your Burn TV Cube'south HDMI connection.

How to set up Fire TV Cube

Your Burn down Boob tube Cube comes with an Alexa Voice Remote that you can utilise to navigate the Burn Boob tube interface. You may decide to opt only to apply Alexa vocalisation commands to control Fire Idiot box, just y'all yet need the remote to become through the initial configuration. So, before proceeding, remove the back cover of the Alexa Phonation Remote, insert the 2 batteries that came with Fire TV Cube, and and so reattach the back cover.

When y'all tune to the Fire Tv Cube HDMI port on your Television, the Fire TV Cube starts upwards for the first fourth dimension and takes y'all through the following setup process:

ane. On the Alexa Voice Remote, printing the Play/Pause push.

Fire Tv Cube asks you to cull your linguistic communication.

two. Use the Alexa Voice Remote to choose the language you want to use.

I talk about how to utilize the Alexa Vox Remote in more detail in Chapter 4. For now, you lot apply the Alexa Vocalisation Remote to "cull" something by using the navigation ring to press Down (the lesser office of the ring), Up (the top office of the ring), Left (the left part of the ring), or Right (the right role of the ring) to highlight the item you want; then press Select (the circular area in the middle of the navigation ring).

After a few moments, Fire TV Cube displays a list of nearby Wi-Fi networks.

3. Choose your Wi-Fi network.

Fire Tv set Cube prompts yous to enter the network password.

4. Use the Alexa Voice Remote'due south navigation ring to enter each character in your network password, and and so choose Connect (or press Play/Intermission on the remote).

If your network password requires one or more uppercase letters, yous can switch to upper-case letter characters past choosing the aA push button or by pressing Menu on the Alexa Vocalization Remote.

Fire Television Cube connects to your network then checks to come across if there is an available update to Fire Os, the operating system that runs Fire TV Cube. If an update is available, Burn TV Cube downloads and installs the software, which can have a few minutes. Note that Fire Tv set Cube may restart during this process.

Somewhen, Burn down Goggle box Cube asks you to sign in to your Amazon account.

five. Cull I Already Have an Amazon Account.

Fire TV Cube displays the Enter Your Amazon Login ID screen.

What if yous don't accept an Amazon account? No problem. Choose I Am New to Amazon; then use the Create Business relationship screen to set up your business relationship.

6. In the E-mail Address field, use the Alexa Voice Remote's navigation ring to blazon your Amazon account'due south email accost, and then choose Side by side.

Fire TV Cube displays the Enter Your Amazon Account Countersign screen.

7. In the Countersign field, use the Alexa Voice Remote's navigation ring to type your Amazon account's password, and and then choose Sign In.

By default, Fire Telly Cube hides the password by displaying each character as a dot. If you desire to brand sure you entered the password correctly, choose the Show Password button.

If you've enabled 2-cistron hallmark on your Amazon account, Fire TV Cube will prompt you to enter a lawmaking to verify the sign-in. Type the code that was sent to you lot, and so cull the Adjacent button.

Burn down Tv set Cube confirms your Amazon credentials, signs in to your account, and then registers your Fire Television set Cube. Burn down Goggle box Cube then asks which Amazon account you desire to use.

8. Cull Go on.

Fire TV Cube now asks if y'all want to save your Wi-Fi password to Amazon. This is part of a feature that Amazon calls Wi-Fi Simple Setup, which enables other Amazon devices you own (such as Repeat smart speakers) to automatically connect to your network. This feature really makes setting up those devices easier, so information technology'southward a skilful thought to permit Amazon save your password.

9. Choose Yes.

Burn down TV Cube now prompts you to enable parental controls.

ten. Choose No Parental Controls.

Fire Idiot box Cube asks if you lot want to set up your streaming services.

xi. Choose No Thanks.

If you lot do desire to set upward your services now, choose Get Started, and then follow the onscreen prompts.

Fire Tv set Cube asks if you want Alexa to help you prepare up your TV and other equipment.

12. Choose Proceed.

If you lot don't want to bother with this, cull Practice This Later, instead.

To actually do this afterward, choose Settings→Equipment Control→Set up Up Equipment.

xiii. Gather the remote controls for each device you lot desire Fire Television receiver Cube to command, and then choose Side by side.

You need the remotes both to ostend when Fire TV Cube has successfully controlled some attribute of the device (by pressing the Fast Forward button) and to perform sure tasks that Burn Telly Cube wants to learn how to perform itself (such as changing the input source on your Tv set).

Fire Idiot box Cube runs through your devices, trying each time to find the device automatically. If Burn down Goggle box Cube detects an wrong device, exist certain to choose No and and then select the right device from the list that appears.

fourteen. When the equipment setup is complete, cull Continue.

That'due south it! Your Burn TV Cube is set up to curlicue.

Source: https://www.dummies.com/article/technology/electronics/smart-devices/amazon-fire/how-to-set-up-fire-tv-cube-268650/

Share this post